Webhooks

Webhooks allow you to receive HTTP callbacks when significant events happen in your PagerDuty account, for example, when an incident triggers, escalates or resolves. Details about the event are sent to your specified URL, such as Slack or your own custom PagerDuty webhook processor.

❗️

Migrate to V3 Webhook Subscriptions

  • If you are currently using V1/V2 webhook extensions and need to migrate them to V3 webhook subscriptions, please follow our migration guide or use our migration script (provided as is).
  • An end-of-life date for V2 webhooks has not been set. However, end-of-support for V2 webhooks began on October 31, 2022. This means existing integrations based on V2 webhooks will continue to work, however PagerDuty cannot accept any new feature requests or implement bug fixes.
  • V1 webhook extensions became unsupported on November 13, 2021 and lost functionality on October 31, 2022.

Webhook IPs

🚧

Safelist Updates

As of May 5th, 2022 : The /webhook_ips endpoint will no longer be updated, and the page linked below should be used for all safelist updates.

For a list of IP addresses that PagerDuty uses to send webhooks in each of our service regions, visit our Developer Documentation.

Manage V3 Webhook Subscriptions

There are two places where you can manage V3 webhook subscriptions:

🚧

Required User Permissions

Users with the following roles can manage V3 webhook subscriptions:

  • Manager base role
  • Users with a Manager Team role (just for service's associated with their Team)
  • Admin/Global Admin
  • Account Owner

If, due to your user role (e.g., a Restricted Access user with a Manager Team role), you do not see Integrations in the top navigation bar, you can manage V3 webhook subscriptions on the Service Details Page.

📘

Product Limit

You can create up to 10 webhook subscriptions per unique service and Team ID (e.g., PXXXXXX), as well as for the account-level scope. Attempts to create additional webhook subscriptions will generate an error: Failed to create webhook. Webhook subscription limit exceeded for the selected scope.

You can read more about the Product Limit Reached error code (2019) in our developer documentation: PagerDuty Error Codes.

Add a V3 Webhook Subscription on the Generic Webhooks Page

  1. Navigate to Integrations Generic Webhooks (v3).
  2. Click New Webhook and then perform the following:
    • Webhook URL: Enter the webhook URL.
    • Description (optional): Enter an optional description.
    • Event Subscription: Select the event types that you would like to subscribe to.
    • Custom Header (optional): You may optionally create a custom header by entering a Name and Value.
    • Click Add Webhook.
  3. A confirmation dialog will appear notifying you that the webhook has been created, and it will supply a secret if you would like to verify webhook payloads.

Edit a V3 Webhook Subscription on the Generic Webhooks Page

  1. Navigate to Integrations Generic Webhooks (v3).
  2. Select the webhook’s URL or select Manage.
  3. Click Edit and make the required changes.
  4. Click Save Changes.

Delete a V3 Webhook Subscription on the Generic Webhooks Page

  1. Navigate to Integrations Generic Webhooks (v3).
  2. To the right of the webhook you would like to delete, select Delete.
  3. A confirmation dialog will appear. Click Delete to delete the webhook.

Add a V3 Webhook Subscription on the Service Details Page

  1. Navigate to Services Service Directory select the service where you would like to add the webhook subscription.
  2. Select the Integrations tab, scroll to the Webhooks section and then click Add or manage webhooks for this service.

📘

No V3 Webhooks Found on this Service

If this is the first webhook subscription on the service, you will see No V3 webhooks found on this service. Click Webhook to manage webhook subscriptions on the service, and continue to step 3.

Add a V3 webhook subscription on the service details page

  1. Click New Webhook and then perform the following:
    • Webhook URL: Enter the webhook URL.
    • Description (optional): Enter an optional description.
    • Event Subscription: Select the event types that you would like to subscribe to.
    • Custom Header (optional): You may optionally create a custom header by entering a Name and Value.
    • Click Add Webhook.
  2. A confirmation dialog will appear notifying you that the webhook has been created, and it will supply a secret if you would like to verify webhook payloads.

Edit a V3 Webhook Subscription on the Service Details Page

  1. Navigate to Services Service Directory select the service where you would like to edit the webhook subscription.
  2. Select the Integrations tab, scroll to the Webhooks section and click Add or manage webhooks for this service.
  3. Select the webhook’s URL or select Manage.
  4. Click Edit and make the required changes.
  5. Click Save Changes.

Delete a V3 Webhook Subscription on the Service Details Page

  1. Navigate to Services Service Directory select the service where you would like to delete the webhook subscription.
  2. Select the Integrations tab, scroll to the Webhooks section and click Add or manage webhooks for this service.
  3. To the right of the webhook you would like to delete, select Delete.
  4. A confirmation dialog will appear. Click Delete to delete the webhook.

Send a Test Event

To test that your webhook is configured correctly and that payloads arrive at the other end:

  1. Navigate to Integrations Generic Webhooks (v3).
  2. Select the webhook’s URL or Manage.
  3. Under Test select Send Test Event.
  4. In the confirmation modal, click Yes, Send Event.

Here is an example of the test event’s payload:

{
  "event": {
    "id": "01CH754SM17TWPE2V2H4VPBRO7",
    "event_type": "pagey.ping",
    "resource_type": "pagey",
    "occurred_at": "2021-12-08T22:58:53.510Z",
    "agent": null,
    "client": null,
    "data": {
      "message": "Hello from your friend Pagey!",
      "type": "ping"
    }
  }
}

Supported Resources and Event Types

The following resources and event types are available with V3 webhooks. Additional event types may be added to this list over time.

Incidents

Event TypeDescription
acknowledgedSent when an incident is acknowledged
annotatedSent when a note is added to an incident
conference_bridge.updatedSent when a conference bridge is updated
custom_field_values.updatedSent when Custom Field values are updated
delegatedSent when an incident has been reassigned to another escalation policy
escalatedSent when an incident has been escalated to another user in the same escalation level
priority_updatedSent when the priority of an incident has changed
reassignedSent when an incident has been reassigned to another user
reopenedSent when an incident is reopened
resolvedSent when an incident has been resolved
responder.addedSent when a responder has been added to an incident
responder.repliedSent when a responder replies to a request
status_update_publishedSent when a status update is added to an incident
triggeredSent when an incident is newly created/triggered
unacknowledgedSent when an incident is unacknowledged
workflow.completedSent when an Incident Workflow finishes
workflow.startedSent when an Incident Workflow begins

Services

Event TypeDescription
updatedSent when a service is updated
createdSent when a service is created
deletedSent when a service is deleted

V3 Webhook Subscriptions versus V1/V2 Webhook Extensions

Conceptually, V3 webhook subscriptions and V1/V2 generic webhook extensions are similar; however, there are some differences:

  • V3 Webhook Subscription: A subscription configured to send a webhook to an endpoint every time an event happens on an incident and within a specific scope (team or service) that you care about.
  • V1/V2 Generic Webhook Extension: An endpoint configured to be sent webhooks every time an incident is created, updated, or deleted.

Key Differences

Payload

The final payload of the webhook differs between V1/V2 and V3. The destination service of the webhook will need to be tweaked to handle the new payload.

Incident ID

In Webhooks v3, the incident ID is found in a different payload location than earlier versions. Developers can use the following code snippet to accurately extract the incident ID:

if event.data.type == "incident" {
  incident_id = event.data.id
} else {
  incident_id = event.data.incident.id
}

Custom Headers

You can add custom headers to V3 webhook subscriptions in the web app:

  1. Go to Integrations Generic Webhooks (v3).
  2. Click New Webhook to create a new webhook subscription, or select an existing webhook and click Edit.
  3. In the section Custom Headers, click Add custom header.
  4. In the fields Name and Value, enter an appropriate name and value for your header.
    • Note: If you add more than one custom header, please note that each header must have a unique Name.
  5. Click Save Changes.

After saving changes, custom headers’ value will be redacted for security’s sake.

Redacted custom header

Redacted custom header

Delete a Custom Header

  1. Go to Integrations Generic Webhooks (v3).
  2. Select a webhook and click Edit.
  3. In the section Custom Headers, click to the right of the custom header you’d like to delete.
  4. Click Save Changes.

Request Headers

The user-agent header in the request displays which webhooks version was used: PagerDuty-Webhook/V2.0 for V2 and PagerDuty-Webhook/V3.0 for V3.

V3 webhook subscriptions also introduce two new headers: x-webhook-subscription and x-pagerduty-signature.

Version Comparison

V3 webhook subscriptions offer more event types than previous versions. Please reference the table below for an overview. Also, please note that some event types have a slight name difference between versions, e.g., trigger (v1 and v2) and triggered (v3).

ResourceEventv1v2v3
Incidenttrigger/triggered
acknowledge/acknowledged
unacknowledge/unacknowledged
resolve/resolved
assign
escalate/escalated
delegate/delegated
annotate/annotated
priority_updated
reassigned
reopened
responder.added
responder.replied
status_update_published
conference_bridge.updated
custom_field_values.updated
workflow.completed
workflow.started
Servicecreated
deleted
updated

Migrate from V1/V2 Generic Extensions to V3 Webhook Subscriptions

There are two options to migrate to V3 Webhook Subscriptions:

Migration Guide

The following guide explains how to migrate existing V1/V2 generic webhook extensions to V3 webhook subscriptions. End-of-support for V2 webhooks began on October 31, 2022, and an end-of-life date is TBD. V1 webhook extensions became unsupported on November 13, 2021 and lost functionality in October, 2022.

🚧

Required User Permissions

  • Admins or Account Owners can migrate an account’s V1/V2 webhook extensions to V3 webhook subscriptions.
  • Team Managers can migrate a subset of an account’s V1/V2 webhook extensions to V3 webhook subscriptions based on their Team access.

Step 1: Generate an API Key

Admins and Account Owners:

  1. Generate an API key by navigating to Integrations API Access Keys Create New API Key.
  2. Enter a Description that will help you identify the key later on. If you would like it to be read-only, check the Read-only option. Click Create Key.
  3. A unique API key will be generated. Copy it to a safe place, as you will not have access to copy this key again. Once it has been copied, click Close. If you lose a key you will need to delete it and create a new one.

Team Managers:

🚧

Restrictions

  • Please note that Team Managers will only be able to migrate webhooks for the Teams they are assigned to. They will not be able to migrate an entire account's webhooks.
  • If you want to migrate webhooks for an entire account, please have an Admin or Account Owner perform the instructions above.
  1. Generate a user API key by navigating to User Icon My Profile User Settings tab Create API User Token.
  2. Enter a Description that will help you identify the key later on.
  3. A unique user API key will be generated. Copy it to a safe place, as you will not have access to copy this key again. Once it has been copied, click Close. If you lose a key you will need to delete it and create a new one.

Step 2: Get a List of Existing Webhooks

Get a list of the existing V2 webhooks using the extensions API endpoint. It may be helpful to set the query field in the request to webhook to filter by Generic Webhooks only. If the extension has a name other than Generic Webhook, use that name in the query field instead. Team Managers: You will need to filter by services belonging to your Team(s).

In this example, when the GET /extensions endpoint is called, the response contains a list containing a single extension:

{
    "extensions": [
        {
            "endpoint_url": "https://example.com/webhooks_go_here",
            "name": "My Webhook",
            "config": {
                "headers": null,
                "referer": "https://subdomain.pagerduty.com/extensions"
            },
            "extension_schema": {
                "id": "PJFWPEP",
                "type": "extension_schema_reference",
                "summary": "Generic V2 Webhook",
                "self": "https://api.pagerduty.com/extension_schemas/PJFWPEP",
                "html_url": null
            },
            "extension_objects": [
                {
                    "id": "PYKHOXQ",
                    "type": "service_reference",
                    "summary": "My Application Service",
                    "self": "https://api.pagerduty.com/services/PYKHOXQ",
                    "html_url": "https://subdomain.pagerduty.com/service-directory/PYKHOXQ"
                }
            ],
            "id": "PUGLEKG",
            "type": "webhook",
            "summary": "My Webhook",
            "self": "https://api.pd-staging.com/webhooks/PUGLEKG",
            "html_url": null
        }
    ],
    "query": "webhook",
    "limit": 25,
    "offset": 0,
    "total": null,
    "more": false
}

Step 3: Note the Important Fields

In the response of GET /extensions, for each extension in the extensions array, take note of the endpoint_url, name, and id. To get the service that the extension is linked with, take the id and type inside the extension_objects array.

From the response in Step 1, take note of lines 4, 5, 19, 20, and 26.

Step 4: Decide on Event Types

V3 webhook subscriptions introduce a new way to refine subscriptions with event types. Before creating a new V3 webhook subscription, event types will need to be selected.

📘

Note

In order to receive the same data as a V2 generic webhook extension, all V3 event types will need to be added.

To replicate the existing behavior of the V2 generic webhook extension, all of the available event_types will be used:

"incident.acknowledged"
"incident.annotated"
"incident.delegated"
"incident.escalated"
"incident.priority_updated"
"incident.reassigned"
"incident.reopened"
"incident.resolved"
"incident.responder.added"
"incident.responder.replied"
"incident.triggered"
"incident.unacknowledged"

Step 5: Create a New V3 Webhook Subscription

Using the webhooks subscriptions API endpoint, a webhook subscription can now be created. A mapping of the old V2 request to the new V3 request is described below.

V2 Generic Webhook ExtensionV3 Webhook Subscription
endpoint_urldelivery_method.url
namedescription
extension_objects.idfilter.id
extension_objects.typefilter.type

The new request to POST /webhook_subscriptions will look like the following:

{
    "webhook_subscription": {
        "delivery_method": {
            "type": "http_delivery_method",
            "url": "https://example.com/webhooks_go_here"
        },
        "description": "My Webhook"
        "events": [
            "incident.acknowledged"
            "incident.annotated",
            "incident.delegated",
            "incident.escalated",
            "incident.priority_updated",
            "incident.reassigned",
            "incident.reopened",
            "incident.resolved",
            "incident.responder.added",
            "incident.responder.replied",
            "incident.triggered",
            "incident.unacknowledged"
        ],
        "filter": {
            "id": "PYKHOXQ",
            "type": "service_reference"
        },
        "type": "webhook_subscription"
    }
}

Step 6: Cleanup

At this point, a new V3 webhook subscription has been created that will replicate the existing V1 or V2 generic webhook extension. Duplicate webhooks will be sent so long as both V1/V2 and V3 subscriptions exist. Once it is confirmed that the new V3 webhook subscription is functional, the old generic webhook extension should be deleted using the id found in Step 1.

In the example, the old extension id is found on line 26 from Step 1.


Learn more

You can read more about PagerDuty Webhooks in our Developer Docs here: