SMS Notification Troubleshooting
Troubleshoot issues with SMS notifications
Pre-Checks
Please only proceed with this article after you have completed the necessary Notification Troubleshooting Pre-Checks.
Depending on the country where you are located and which cellular provider you use, a variety of issues may affect your ability to receive PagerDuty SMS notifications. For these reasons, PagerDuty does not have full control over the deliverability of SMS notifications.
We highly recommend push notifications as your primary contact method, which happens automatically when you Log In to the Mobile App, and adding a notification rule for your mobile device. If push notifications are not a viable option, the following sections provide troubleshooting tips for SMS notification delivery issues.
Countries Eligible for SMS Notifications
You can review the full list of countries that are able to receive SMS notifications from PagerDuty in the Supported Countries article. Please check this list before conducting further troubleshooting. Countries marked with an asterisk (*
) indicate Partial Support due to local restrictions and regulations in the region.
In addition, we are not able to guarantee delivery of SMS notifications to numbers that are:
- Landlines, including those with “Text-to-Landline/TTL” services
- Voice over IP (VoIP) or virtual numbers
Duplicate SMS Notifications
PagerDuty relies on third-party vendors to deliver SMS notifications. These vendors, in turn, rely on several SMS partners and carriers to deliver SMS to end users. PagerDuty relies on a delivery receipt from carriers and providers to determine if an SMS notification was delivered. In cases where we do not receive a delivery receipt, PagerDuty takes a more cautious approach, and sends the notification again. If the first notification was actually successful, this will result in a duplicate notification.
Regulatory Policies and Carrier Restrictions
SMS notification content and format are heavily regulated by governments and carriers due to the growing concerns around fraud and abuse, and the aging SMS infrastructure, which provides limited security and privacy. Vendors will drop SMS messages for regulatory non-compliance, as well as SMS messages that violate their message policies.
The list below does not represent an exhaustive list, or a deterministic set of filtering criteria, as carriers and governments do not publish or provide feedback on their policies.
- Messages containing URLs are highly likely to be filtered.
- Recommended Action: Do not include URLs in your stakeholder updates or in any service logs that may make their way into the incident notifications.
- Messages containing sensitive words that mimic fraud, spam or marketing campaigns.
- Recommended Action: When possible, avoid words like "banking," "finance," "marketing," "sale," etc.
Messages Without Sensitive Content
If you SMS notification do not contain sensitive content, but are still getting filtered, please try the following:
- Submit a request to your mobile service provider, asking them to allow all SMS messages from PagerDuty numbers. You can download the most recent PagerDuty numbers from our vCard.
- Use push notifications as your primary contact method.
For more information regarding the SMS regulatory landscape, and why PagerDuty recommends switching to modern channels, such as push notifications, please read 6 Best Practices for Seamless Notifications with International SMS.
Other Common Causes
- Incorrect or Inactive Number: Navigate to your user profile's Contact Information, and double-check your phone number for errors or missing digits. Inactive and invalid numbers will result in delivery failure.
- Blocked Number: There may be some settings on your mobile device that block messages from unknown numbers, or you may have sent an opt-out reply (e.g. “STOP”) to block further SMS communications. Some carriers also restrict SMS messages from certain types of numbers.
- Third-Party Apps: Issues may occur when delivering SMS notifications to virtual numbers from third-party messaging apps. In the event of an application outage or service degradation, users may not be able to receive the messages sent to their virtual number. We recommend sending SMS notifications to your primary mobile device instead.
- Carrier Outage: Check with your mobile service provider, to confirm if there was an outage or service issue at the time you expected to receive the notification.
- Roaming: Prior to traveling, check with your mobile service provider to confirm if there are any additional requirements or restrictions while traveling.
- Mobile Device Settings: Check if there are any mobile device settings which may have prevented you from receiving the notification.
SMS Response Did Not Action the PagerDuty Incident
- Touch-tone Multi-Frequency (DTMF) Issues
- Performing an Incident Action on an Old Notification
- SMS Notification Responses
Touch-tone Multi-Frequency (DTMF) Issues
Touch-tone Multi-Frequency (DTMF) signals, the beeping tones generated from keypad responses, serve the purpose of letting you navigate menus, select options, and input information. When the signal is interrupted or unclear, unintended behavior may occur.
- Connection Issues: A weak signal, data packet loss, or overloaded infrastructure can disrupt the clear transmission of DTMF signals.
- Carrier Issues: Compatibility issues, misconfigured system settings, or outdated equipment can sometimes cause DTMF signals to be misinterpreted. This can be more common with older phones or specific VoIP services.
- Keypad Buttons: Worn-out or sticky buttons on your device's keypad may not register your presses accurately. Try cleaning them or using a different device.
Performing an Incident Action on an Old Notification
PagerDuty takes a cautious approach to notifications, so that older notifications do no overwrite newer, important incident state changes.
The following is a list of some incident state changes:
- Escalations
- Resolves
- Reassigning an incident
Once an incident changes state, users can no longer take action on an incident using older notifications that were generated prior to the state change.
SMS Notification Responses
Due to a variety of factors, some countries may not support responding to SMS messages to acknowledge or resolve an incident, even if you can receive SMS notifications. Please see the full list in our Supported Countries article.
SMS Restrictions
- Short Code Messaging Restrictions
- Provider-Specific Issues with Short Codes
- Geographic Restrictions
- Message Length Restrictions
Short Code Messaging Restrictions
Some mobile carriers restrict messages from, or to, short codes. If you aren't receiving SMS notifications from PagerDuty and your phone number meets any of the conditions below, you may need to contact your provider to verify that your account is allowed to receive SMS notifications from short codes:
- Pay-as-you-go numbers.
- Any number that was pay-as-you-go and is now on a standard plan.
- Any number that is or was used by a business in the past.
Provider-Specific Issues with Short Codes
- T-Mobile USA has a default content filter set. In order to remove the content filter set, you must specifically call T-Mobile and authorize PagerDuty's short code numbers (73889, 42752, and 43105).
- If you recently upgraded your device with T-Mobile, they may have put a block on the account that could prevent it from receiving short code messages.
Geographic Restrictions
SMS URL Content Restrictions
To comply with local laws and regulations, SMS messages will have URLs replaced with the words URL redacted
in the following countries:
- Malaysia
- Philippines
- Thailand
India's Do Not Disturb (DND) Registry
Users in India should make sure that their phone number is not in the national DND registry. India's government provides a lookup utility to determine if a number is listed there.
Message Length Restrictions
There is a maximum length of 1600 characters for all SMS notifications sent by PagerDuty. Our incident notifications are designed to be under this limit.
If you use a custom Status Update Template and you notice messages are truncated, we suggest updating your templates to ensure a message length that is under 1600 characters.
Best Practices
We highly recommend using push notifications and Slack as your primary notification methods, as these mechanisms are 99.99% reliable.
Staggering your notification rules can also help deliverability.
Updated 2 months ago